Attract wild birds to your yard or property year round with this Bird Bath De-icer with Aluminum Base. Now you don't have to store your bird bath over the winter. Just add this De-icer and it will keep your bird bath ice-free all winter long, even in sub-zero temperatures. The BDT250 has a durable, nonstick-coated, compact aluminum base in a low-profile design. Fins give this de-icer a large surface area, which allows the unit to run cooler while putting out the same amount of heat as conventional de-icers. Channels within the base promote water flow as the water is heated, which helps to eliminate mineral buildup. Multiple thermostat control offers increased efficiency. The BDT250 is safe to use in plastic bird baths and comes with a 10' cord with anti-rub protector. cULus Listed. 250 watts, 120 volts, 60 Hz. One year warranty.

Compact and durable aluminum Heating Element.
PTFE Non-stick Coating for easy cleaning.
Multiple thermostats for safe, optimized control.
10' anti-rub cord.
cULus Listed.

[instruction]OPERATION: Simply place the unit into the water that you wish to keep de-iced. Connect the cord to a properly grounded, GFCI-protected receptacle while observing the cautions above. The unit will turn on when the water temperature approaches freezing conditions and will heat the water 10 to 20 degrees Fahrenheit before turning off. Multiple thermostats within the unit monitor water temperature as well as guard against overtemp conditions. Please note: the unit will not turn on unless the water temperature is approaching freezing. If you wish to test the unit, you must place it in a freezer for 15 minutes to get it cold enough to turn on. INSTRUCTIONS FOR THE LOCKNDRYÂ® CORDSET - Plugs into any normal 3-prong outlet - Mates with LOCKNDRYÂ® plugs to form a water-resistant seal - Keeps connection from separating during use - Features a second, locking nut for a secure connection INSTRUCTIONS (1) Insert the plug into the receptacle just as you would a normal extension cord making sure the plug is fully inserted. (2) Slide the large nut forward to engage the threads on the plug. (3) Rotate the nut to tighten the plug against the receptacle. (4) Slide the second, thinner, red nut forward to engage the threads. (5) Rotate the red nut snugly against the larger nut.[/instruction]

API Bird Bath De-Icer w/ Aluminum Base