Everything you need to create a cozy home for your pet. Housing, feeder, and water bottle are all included in this easy-to-assemble kit. You get a rust-resistant, chew-proof wire mesh hutch with clips and special pliers to put it together, plus a plastic dropping pan and frame kit to attach the pan under the hutch for easier cleaning. You also get a 5 inch-wide galvanized metal sifter-bottom feeder with lid and a 32-ounce (1-quart) plastic water bottle. Hutch measures 24 inch square by 16 inch high, assembly required. Can be used indoors or outdoors. Excellent for rabbits, hamsters, guinea pigs, chinchillas, ferrets, gerbils, and other small animals. All you add is a good diet and some TLC!

Rust-resistant, chew-proof wire mesh hutch.
Metal clips and special pliers to assemble the hutch.
Plastic dropping pan and frame kit to attach the pan under the hutch.
Galvanized metal sifter-bottom feeder with lid.
32-ounce (1-quart) plastic water bottle.

[instruction]Using the ACP2 Wire Clip Pliers: 1. Place ACC1 Wire Cage Clip in the pliers. 2. Position clip next to wires to be fastened. 3. Close the pliers to form clips around wires CAUTION: Avoid pinching skin in pliers. Assembly Instructions: 1. Lay out the hutch panels as shown in Figures 2 - 4. Use the illustration that matches your model hutch. You can put the door on the right or left side of the front of the hutch. 2. Fasten a clip at each. Do not put clips where appears. NOTE: You do not need to be exact in placing the clips. 3. Raise two panels so that they meet at the corner. Fasten clips at each shown in Figure 5. Repeat for the other corners. 4. Attach the door on the inside of the hutch using clips at each shown in Figure 6. 5. Attach the spring and door latch as shown in Figure 6. 6. Slide the vinyl door guards over the edge of the door opening. 7. Place the top panel on top of the side panels. Fasten clips at each shown in Figures 7 - 9. Do not put clips where the appears.[/instruction]

Pet Lodge Rabbit Hutch Complete Kit