API Drain Plug De-Icer

INSTALLATION INSTRUCTIONS 1. Unscrew plastic nut on the outside of Rubbermaid® tank. Save the nut and rubber washer. 2. Remove drain plug assembly. Save the rubber washer. 3. Insert one rubber washer over the cord and onto the de-icer. This washer should rest against the red plastic plate at the end of the threaded section. 4. Insert de-icer from the inside of the tank. Be sure the up arrow is pointed up (located on plastic plate of de-icer). 5. Pull cord through hole in tank. 6. Insert the second rubber washer and plastic nut over the cord. 7. Be sure the second washer is sandwiched between the plastic nut and the surface. Tighten nut. INSTRUCTIONS FOR THE LOCKNDRY® CORDSET FEATURES - Plugs into any normal 3-prong outlet - Mates with LOCKNDRY® plugs to form a water-resistant seal - Keeps connection from separating during use - Second, locking nut for secure connections INSTRUCTIONS (1) Insert the plug into the receptacle just as you would a normal extension cord making sure the plug is fully inserted. (2) Slide the large nut forward to engage the threads on the plug. (3) Rotate the nut to tighten the plug against the receptacle. (4) Slide the second, thinner, red nut forward to engage the threads. (5) Rotate the red nut snugly against the larger nut.