Motomco Mole Trap

Professional grade quality and innovative design make the Motomco Mole Trap your best choice for capturing and killing moles. Made from heavy duty, glass filled nylon, the durable construction won't rust and can be used again and again. Motomco Mole Trap is safe and easy to use and is easily set with a foot pedal that springs back once a mole has been caught. Simply place the curved jaws over the top of an active runway, step down on the foot pedal and moles will trigger the trap.

• Innovative and effective design.
• Dual springs for maximum power and curved jaws that scoop moles for improved capture.
• Made from heavy duty, durable nylon - no sharp spikes and won't rust over time.
• Can be used again and again.
• Easy to use, with easy to set foot pedal that will spring back when trap is triggered.
• Use on its own or part of an integrated Mole Control program with Motomco Mole Killer.

1. If the trap won’t set: DO NOT JUMP ON IT! If slots were cut in the tunnel, the trap should set easily. If you continue to meet resistance, move the trap to another tunnel location. Check that the trigger indentation has not filled in with soil while you tried to set the trap. Make the trigger indentation again and then continue to reset the trap. Make sure mud isn’t interfering with the trap’s catch movement. Clean off the trap and then try setting it in another location. 2. Poke a hole in the tunnel 6-inches away from each side of the trap. After one week, if one or both of the holes have been sealed and the trap didn’t spring check the trigger post. If it is up 1-inch above the foot pedal, use a spade to pry the trap up from the ground which should spring the trap. Clean off any dirt and mud then move the trap to another tunnel location and reset. 3. If you push the safety release button on the trap and it doesn’t spring, follow the same steps as above. 4. If the soil is very soft, the trap could be pushed too far into the ground. It is better to set the trap in a location with firmer soil.